Before downloading from this site, you should first carefully read this page, which contains the following information. Computer system requirements for using the Internet Data Expansion System • How to connect your keyboard and computer • How to download the Music Data Management Software

	The following are the minimum computer system requirements for using the Internet Data Expansion System • Operating System: Windows®98SE, ME, 2000, or XP (Japanese or English version) (Operation on a Macintosh is not supported.) • Computer: IBM PC/AT or compatible, or NEC PC-98 Series <Windows® 98SE, ME, and 2000> • CPU: Pentium 166MHz or higher (200MHz or higher recommended) • Memory: 64MB minimum (128MB or more recommended) <Windows® XP > • CPU : Pentium 300 MHz or higher • Memory : 128MB minimum <Windows® 98SE, Me, 2000 and XP > • Available Disk Space : 10MB minimum • Sound Blaster or compatible audio card with joystick port (recommended), or an environment that allows normal MIDI IN/OUT operations using a USB or serial port • Internet Explorer 4.0 or higher, or Netscape Navigator 4.04 or higher • Internet connectability • Display : High Color (16-bit) or greater (1,024 x 768 dots or greater) Though this application is designed to run under the standard configurations described above,note that it may not be able to run correctly under certain software and hardware environments. Internet Data Expansion System compatible CASIO keyboard • It is up to you to supply a Sound Blaster MIDI Cable. Such cables should be available in the MIDI section of your local music shop or computer shop. • You can connect your CASIO keyboard to a computer equipped with a Sound Blaster or compatible audio card with joystick port. • For full details about connections, click here. • If your computer does not have a joystick port, you can connect your CASIO keyboard using the commercially available USB MIDI interface. For full details, click here. Note that some computers do not support use of a MIDI interface. Be sure to check whether your computer supports use of MIDI interface before actually purchasing one.

	You must install Music Data Management Software on your computer before you can exchange data with your CASIO keyboard.You can download any one of the two packages listed below, depending on the Windows OS you use. Music Data Management Software 1.0 provides you with the following functions. • CASIO keyboard memory data management (data load, delete) • Conversion of Internet data and computer data to a format that can be read by the keyboard's memory card slot, and the ability to write directly to a memory card loaded in the computer. Conversion of data stored on a memory card by the keyboard' so it can be read directly from the computer's card slot and manipulated on the computer. • Transfer of data between your computer and a floppy diskette • Data conversion from SMF Type 1 to SMF Type 0 •English Manual for Application English Manual for Application,(508kbytes) •Application Downloads (Recommended for Windows® 98SE and Me) Application (1.0), Windows® Installer,(2,876 kbytes) After downloading, double-click wk3-10eni.exe to start installation of Data Management Software. •Application Downloads (Recommended for Windows® 2000 and XP) Application (1.0), Windows® Installer,(1,181 kbytes) After downloading, double-click wk3-10en.exe to start installation of Data Management Software. Important! If your computer is running Windows 2000, check to make sure that you have the Version 3 or greater Service Pack installed before starting installation.You can use the Windows Update function to install the latest Service Pack. Music Data Management Software 2.0 provides you with the following functions, in addition to those provided by Version 1.0. • CASIO keyboard memory data management (data store) • Editing of keyboard parameters (Synth, Drawbar, DSP, Mixer, etc.) from your computer • Transfer of data between your computer and a floppy diskette • Conversion of Internet data and computer data to a format that can be read by the keyboard's disk drive, and the ability to write directly to a diskette loaded in the computer's disk drive. Conversion of data stored with the keyboard's disk drive so it can be read directly from the computer's disk drive and manipulated on the computer. • Creation of keyboard-compatible rhythm patterns from SMF • Conversion of a standard waveform file in computer memory to a keyboard-compatible tone with waveform   •Version 2 Manual Application Manual The manual file you download is compressed using zip format. Expand the compressed file. •Batch Downloading the Version 2 Application (Windows® 98SE, Me, 2000, XP) Application (Version 2) + Windows® Installer (7,942kbytes) After downloading, double-click wk3-20en.exe to start installation of Data Management Software. •Downloading Version 2 in Parts (Windows® 98SE, Me, 2000, XP) Application (Version 2) + Windows® Installer (7,942 kbytes) part1 part2 part3 part4 part5 part6 wk3-20en-c.exe None of the files is greater than 1.5MB in size. After downloading all of the files into the same folder, double click the program for joining them together (wk3-20en-c.exe). Next, double-click the installer (wk3-20en.exe) to start installation of the Data Management Software.

All Rights Reserved, Copyright ® CASIO COMPUTER CO., LTD. 1995 - 2003.